Omega DP26-TC - Manual (Page 57)

49
SECTION 13. SPECIFICATIONS (continued)
ALARM OUTPUTS 2 Form "C" on/off relays. Configurable for latched and
(if applicable) unlatched by software.
Max current: 5 AMPS, resistive load
Max voltage: 250 Vac or 30 Vdc
ENVIRONMENT
~ ~ AC units 115/230 V~(AC) + 10%, 50/60 Hz
7 W max, power consumption (Non-Isolated Analog Out)
8 W max, power consumption (Isolated Analog Out)
DC units 10-32 Vdc or 26-56 Vdc,
6 W max, power consumption (Non-Isolated Analog Out)
7 W max, power consumption (Isolated Analog Out)
External Fuse Required:
IEC 127-2/III
Power Fuse
115 V 125 mA @ 250 (T)
230 V 63 mA @ 250 (T)
UL 248-14 (Listed Fuse)
Power Fuse
115 V 175 mA @ 250 V Slow-Blow
230 V 80 mA @ 250 V Slow-Blow
ENVIRONMENT
Operating temperature: 0° to 50°C (32° to 122°F)
(115/230 V rms + 10%)
Storage temperature: -40° to 85°C (-40° to 185° F)
Relative humidity: 90% at 40°C (non-condensing)
MECHANICAL
Panel cutout: 1/8 DIN 3.62 x 1.78" (45 x 92mm)
Weight: 1.27 lb (575 g)
Case material: Polycarbonate, 94 V-O UL rated
Protection: NEMA-4/Type 4 Front Beze L