Oregon Scientific Radio controlled projector alarm clock EW98 User Manual
Page 5

EN
3
4.Ice alert indicator light:
-
Flashes when the outdoor temperature is
between -2.0°C(28 °F) and 3.0°C(37 °F).
5.+/CHANNEL key:
-
Press it once to switch among Channel 1, 2
and 3.
-
Press and hold it for 2 seconds to view the
channels automatically Press it again to exit
the automatic display mode.
-
In time setting mode, press it to increase the
setting values.
6.SET CLOCK key:
-
In normal time mode, press it once to enter
the normal time setting mode.
-
In normal time setting mode, press it to step
the setting items. Press and hold it to exit the
setting mode in any step.
-
In normal time setting mode, press it to step
the setting items. Press and hold it to exit the
setting mode in any step.
7.-/MIN.MAX. key:
-
Press it to show the minimum and maximum
temperature records in the past 24 hours.
-
Press and hold it for 3 seconds to delete the
minimum and maximum temperature records.
-
In time setting mode, press it to decrease the
setting values.
8.DC jack:
-
Plug DC adaptor to power the clock.
9.ALARM ON/OFF key:
-
Press it once to turn on the backlight and
display the alarm time for 5 seconds.
-
Press it again to turn on/off the alarm.
10.SET ALARM key:
-
Press it once to turn on the backlight for 5
seconds, and press it again to enter the alarm
time setting mode.
-
In alarm time setting mode, press it to step
the setting items.
11.FOCUS turning knob:
-
Focus the projected image.
12.BATTERY COMPARTMENT:
-
Accommodates 2 AA size batteries.
13.RESET key:
-
Press it to return all values to default values.
-
In case of malfunction, the unit may be
required to reset.
14.°C/°F slide switch:
-
Slide it to switch between Celsius and
Fahrenheit.