Oregon Scientific SL110 - Manual

FR
CHRONOMÈTRE NUMÉRIQUE
Model: SL110
MODE D’EMPLOI
INTRODUCTION
Merci d’avoir choisi ce chronomètre (SL110) d’Oregon
Scientific
TM . Conservez ce manuel car il contient instructions
et des informations qui peuvent vous être utiles.
VUE D’ENSEMBLE DE L’HORLOGE
FACE AVANT ( FIG. 1)
1. SPLIT / RESET (FRACTURER / REINITIALISER) :
Fracturez / réinitialisez le chronomètre; basculez les
options de réglage
2. Icône du jour de la semaine
3. Icône AM / PM
4. MODE: Basculez entre les options
5. START / STOP (COMMENCE / ARRETE): Commencez
/ arrêtez le chronomètre; réglez les valeurs
6. : Indique que l’alarme est activée
7. Gardeur de bride
SEQUENCE DE MODE
Appuyez MODE pour naviguer entre les modes:
Mode Horloge Mode Chronomètre
Mode de rglage heur / date Mode d’Alarme
MODE HORLOGE
Appuyez START / STOP pour visualiser la date.
Pour régler l’heur et la date:
1. Naviguez jusqu’au mode de réglage heur / date.
2. Appuyez START / STOP pour changer les valeurs.
Appuyez et maintenez enfoncé pour rapidement
parcheminer entre les valeurs.
3. Appuyez SPLIT / RESET pour aller jusqu’au prochain
réglage. La séquence des réglages est: réglez les
secondes à zéro, minute, heur / mode horaire 12 / 24,
date, moi / jours de la semaine.
4. Appuyez MODE pour retourner au mode horloge
REMARQUE Appuyez et maintenez enfoncé START /
STOP pour parcheminer entre les valeurs horaires et entre
les modes horaires 12 / 24.
MODE CHRONOMETRE
Pour fonctionner le chronomètre:
1. Naviguez jusqu’au mode chronomètre.
2. Appuyez START / STOP pour commencer et arrêter le
chronomètre.
3. Appuyez SPLIT / RESET pour réinitialiser le chronomètre
quand il est mit sur pause et pour fracturer les mesures
du chronomètre pendant qu’il est toujours en marche.
MODE ALARME
Pour régler l’alarme:
1. Naviguez jusqu’au mode d’alarme.
2. Appuyez SPLIT / RESET pour sélectionner entre heure
/ minute.
3. Appuyez START / STOP pour parcheminer
progressivement jusqu’aux réglages désirés. A indique
le matin et P l’après midi.
4. Appuyez MODE pour confirmer.
Pour basculer l’alarme sur ON / OFF:
1. Appuyez SPLIT / RESET pour afficher l’heure de l’alarme
pendant que vous êtes dans le mode d’horloge.
2. Pour mettre l’alarme sur ON / OFF appuyez START /
STOP pendant que vous maintenez enfoncé SPLIT /
RESET. Lorsque l’alarme fut activée
indiquera que
l’alarme est sur ON.
EN
SL110
FIG. 1
DIGITAL STOPWATCH
Model: SL110
USER MANUAL
INTRODUCTION
Thank you for selecting this Oregon Scientific TM Stopwatch.
Please keep this manual for instructions and information you
should know about.
CLOCK OVERVIEW
FRONT VIEW (FIG. 1)
1. SPLIT / RESET: Split / reset stopwatch; toggle setting
options
2. Day icon
3. AM / PM icon
4. MODE: Toggle between options
5. START / STOP: Start / stop stopwatch; set values
6.
: Indicates alarm is on
7. Strap Keeper
MODE SEQUENCE
Press MODE to navigate between modes:
Clock Mode Stopwatch Mode
Time / date setting Mode Alarm Mode
CLOCK MODE
To view the date press START / STOP.
To set time and date:
1. Navigate to time / date setting mode.
2. Press START / STOP to set the value. Press and hold to
quickly scroll through the settings.
3. Press SPLIT / RESET to move to the next setting. The
setting sequence is: set seconds to zero, minute, hour /
12 / 24 hour mode, date, month and weekday.
4. Press MODE to return to Clock mode.
NOTE Press and hold START / STOP to scroll through hour
settings and 12 / 24 hour formats.
STOPWATCH MODE
To operate stopwatch:
1. Navigate to stopwatch mode.
2. Press START / STOP to start and stop timer.
3. Press SPLIT / RESET to reset timer when paused and
to split time measurements while timer is still running.
ALARM
To set alarm:
1. Navigate to Alarm Mode.
2. Press SPLIT / RESET to select between hour / minute.
3. Press START / STOP to scroll up and set the desired
time. A indicates am and P indicates pm.
4. Press MODE to return to clock mode.
To toggle alarm ON / OFF:
1. Press SPLIT / RESET to display alarm time in clock
mode.
2. To toggle the alarm ON / OFF press START / STOP
while pressing and holding SPLIT / RESET. When
activated
indicates alarm is ON.
To silence alarm:
•
Press START / STOP to silence it for 5 minutes.
OR
•
Press SPLIT / RESET to turn the alarm off. It will re-
activate after 24 hours.
PRECAUTIONS
• Do not subject the unit to excessive force, shock, dust,
temperature or humidity.
• Do not cover the ventilation holes with any items such as
newspapers, curtains etc.
• Do not immerse the unit in water. If you spill liquid over
it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive materials.
• Do not tamper with the unit ’s internal components. This
invalidates the warranty.
• Only use fresh batteries. Do not mix new and old
batteries.
• Images shown in this manual may differ from the actual
display.
• When disposing of this product, ensure it is collected
separately for special treatment .
• Placement of this product on certain types of wood
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture
manufacturer’s care instructions for information.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
• Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
• Please note that some units are equipped with a
battery safety strip. Remove the strip from the battery
compartment before first use.
NOTE The technical specifications for this product and the
contents of the user manual are subject to change without
notice.
SPECIFICATIONS
TYPE DESCRIPTION
L x W x H 60 x 23 x 70 mm (2.4 x 0.9 x 2.8 in)
Weight 50 g (1.8 oz)
Clock HH:MM:SS
Hour Format 12 / 24 hour format
Calendar Day / month-date
Alarm 5-minute snooze function
Power 1 x LR44 1.5V battery
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more
about Oregon Scientific products.
If you’re in the US and would like to contact our Customer
Care department directly, please visit:
www2.oregonscientific.com/service/support.asp
OR Call 1-800-853-8883.
For international inquiries, please visit:
www2.oregonscientific.com/about/international.asp.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV
technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact for
support or sales. Please call our customer service number
(listed on our website at www.oregonscientific.com, or on the
warranty card for this product) for all inquiries instead.
We
Name:
Oregon Scientific, Inc.
Address: 19861 SW 95th Ave.,
Tualatin, Oregon 97062 USA
Telephone No.: 1-800-853-8883
declare that the product
Product No.:
SL110
Product Name: Digital Stopwatch
Manufacturer: IDT Technology Limited
Address: Block C, 9/F, Kaiser Estate,
Phase 1,41 Man Yue St., Hung
Hom, Kowloon, Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) This device may
not cause harmful interference. 2) This device must accept
any interference received, including interference that may
cause undesired operation.
1 4
5
6
7
2
3
SL110_M_USA_OP.indd 1 5/8/07 10:12:12 AM