Olympus DM-550 - Manual (Page 47)

47
4
EN
M
e
n
u s
et
tin
g m
et
h
o
d
Rec Mode
The recorder can record in the linear PCM
format (For DM-550). High resolution
recording at a high sampling rate and high
bit rate equivalent or superior to that of
a music CD is possible. Moreover, it also
supports the MP3 and WMA formats.
1 Select the recording format.
[PCM]:
This is an uncompressed audio format
which is used for music CDs and the like.
[MP3]:
MPEG is the international standard
established by a working group of the
ISO (International Organization for
Standardization).
[WMA]:
This is an audio compression encoding
method that was developed by the
Microsoft Corporation in the US.
2 Select the recording rate.
[PCM]: [48kHz/16bit] or [44.1kHz/16bit]
[MP3]: [320kbps] to [128kbps]
[WMA]: [ST XQ],[ST HQ],[ST SP], [HQ], [SP], [LP]
• To record a meeting and lecture clearly, set
other than [LP] in Rec Rate.
• When the external monaural microphone
is used while [Rec Mode] is set to a stereo
recording mode, it enables recording only
with the L channel microphone.
Menu setting method
Rec Menu
Mic Sense
Microphone sensitivity is adjustable to meet
recording needs.
[High]:
Highest recording sensitivity suitable
for conferences with large crowds and
recording audio at a distance or low
volume.
[Middle]:
Suitable for recording meetings and
seminars with a small number of people.
[Low]:
Lowest recording sensitivity suitable for
dictation.
• When you would like to clearly record
a speaker’s voice, set [Mic Sense] to
[Low] and hold recorder’s built-in stereo
microphone close to the speaker’s mouth
(5-10 cm) before recording.
Set the method for adjusting the recording level
[Rec Level] (For DM-550)
You can set the device to automatically or
manually adjust the recording level.
[Manual]:
Recording is performed by manually
adjusting the recording level.
[Auto]:
Recording is performed by automatically
adjusting the recording level. This is useful
for when you will be recording right away.
Adjust the recording level:
Press the 9 or 0 button while
the recorder is recording or paused
to adjust the recording level.
• The recording level will be automatically
adjusted when the recording level is set
to [Auto]. Set the recording level to
[Manual] to use the recording level
adjustment feature.
• When the unit is set to [Manual],
the limiter function will be disabled.
Distor ted sound will be recorded
during [OVER] is displayed. Adjust the
recording level so that [OVER] is not
displayed.