Omega Vehicle Security OMG-COMM232-PCI - Manual (Page 7)

Card Setup
Omega Engineering COMM+232.PCI Page 3
To double these rates up to a maximum rate of 230.4K bps place the jumper in the
divide by 2 (silk-screen DIV2) position.
DIV1 DIV2 DIV4
Figure 2 - Clocking Mode 'Divide By 2’
Baud Rates and Divisors for the ‘DIV2’ mode
The following table shows some common data rates and the rates you should
choose if using the adapter in the ‘DIV2’ mode.
For this Data Rate Choose this Data Rate
1200 bps 600 bps
2400 bps 1200 bps
4800 bps 2400bps
9600 bps 4800 bps
19.2K bps 9600 bps
38.4K bps 19.2K bps
57.6 K bps 28.8K bps
115.2 K bps 57.6 K bps
230.4 K bps 115.2 K bps
If your communications package allows the use of Baud rate divisors, choose the
appropriate divisor from the following table:
For this Data Rate Choose this Divisor
1200 bps 192
2400 bps 96
4800 bps 48
9600 bps 24
19.2K bps 12
38.4K bps 8
57.6K bps 4
115.2K bps 2
230.4K bps 1