Omega Vehicle Security OMG-COMM232-PCI - Manual (Page 5)

Introduction
Omega Engineering COMM+232.PCI Page 1
Introduction
Overview
The Omega Engineering OMG-COMM+232.PCI is a two channel PCI Bus serial
I/O adapter for the PC and compatibles. It provides two RS-232 serial ports
supporting data rates up to 460.8K bps.
The OMG-COMM+232.PCI works seamlessly with the standard operating
system serial driver. UART upgrades are available providing 32 and 64 byte
FIFOs.
What’s Included
The OMG-COMM+232.PCI is shipped with the following items. If any of these
items are missing or damaged, contact the supplier.
•
OMG-COMM+232.PCI Serial I/O Adapter
•
Serial Utility Software
•
User Manual
Factory Default Settings
The OMG-COMM+232.PCI factory default settings are as follows:
Port # Clock Mode
Port 1 DIV4
Port 2 DIV4
To install the OMG-COMM+232.PCI using factory default settings, refer to
Installation on page 7.
For your reference, record installed OMG-COMM+232.PCI settings below:
Port # Clock Mode
Port 1
Port 2