Figure 4: suspension methods, Figure 4 – Roberts Gorden Compact Tubular Unit Heaters CTCU 27 User Manual
Page 17

SECTION 6: H
EATER
I
NSTALLATION
11 of 42
Figure 4: Suspension Methods
Existing cabinet screws must be re-used.
Cone Point
Set Pin
Window
Clamp
Unistrut
10 mm
Steel
Drop Rod
Nut
Washer
Riv
Nut
Support Points
Ensure all suspension hardware
is torqued to a minimum
of 27 Nm (20 ft lbs).
NOTE: For vertical installations, use the mounting points on the rear of the unit.
10 mm
Steel
Drop Rod
Washer
Nut
Unistrut
Channel Nut
Shelf Mounting
Brackets
Description
Part Number
Qty.
Shelf Mounting Bracket
Kit
11111510K
1
Shelf Mounting Bracket (2)
111111510
2
Screw #10 x 1/2"
Type AB Phil HWH Z (2)
94311008
2
This manual is related to the following products: