RCA SDTV 27V514T - Manual (Page 12)

Plug in the TV
Plug the end of the power cord into a grounded wall outlet. Insert the plug completely into
the outlet.
Put Batteries in the Remote
• Remove the battery compartment cover from the back of the remote by pushing down
and sliding off the cover.
• Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are aligned correctly to the
diagram inside the battery compartment.
• Replace the cover.
OK button
Arrow
buttons
How to Use the Remote Control to
Complete the Initial Setup
The technical term is “Navigation” - how you move through the
on-screen menus. The method is the same throughout the menu
screens: highlight your choice and select it.
To highlight a menu item, press the arrow buttons on the remote to
highlight one of the items listed on the screen. Use the up or down
arrow button to move up or down. Use the right or left arrow button
to move right or left.
To select the item that you’ve highlighted, press OK.
Note: Highlighted means that the menu item stands out from
other menu items on the list (appears darker, brighter or a
different color).
Turn on the TV
Press ON•OFF on the remote, or press POWER on the TV’s front
panel.
Connections & Setup
10 Chapter 1