GIGABYTE GA-MA790FXT-UD5P - Manual (Page 10)

GA-MA790FXT-UD5P Motherboard - 10 -
1-2 Product Specifications
CPU  Support for Socket AM3 processors:
AMD Phenom
TM II X3 processor/AMD Phenom TM II X4 processor
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport Bus  5200/2000 MT/s
Chipset  North Bridge: AMD 790FX
 South Bridge: AMD SB750
Memory  4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)
 Dual channel memory architecture
 Support for DDR3 1666(O.C.)/1333/1066 MHz memory modules
(Go to GIGABYTE's website for the latest memory support list.)
Audio  Realtek ALC889A codec
 High Definition Audio
 2/4/5.1/7.1-channel
 Support for Dolby ® Home Theater (Note 2)
 Support for S/PDIF In/Out
 Support for CD In
LAN  2 x Realtek 8111DL chips (10/100/1000 Mbit)
 Support for Teaming
Expansion Slots  2 x PCI Express x16 slots, running at x16
(The PCIEX16_1 and PCIEX16_2 slots support ATI CrossFireX
TM
technology and conform to PCI Express 2.0 standard.)
 3 x PCI Express x1 slots
 2 x PCI slots
Storage Interface  South Bridge:
-
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3,
SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, RAID 10 and JBOD
 GIGABYTE SATA2 chip:

2 x JMB322 chips (Smart Backup):
-
4 x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1, GSATA2_2,
GSATA2_3) supporting up to 4 SATA 3Gb/s devices
(Note 3)
- Support for SATA RAID 0, RAID 1 and JBOD
 iTE IT8720 chip:
-
1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394  T.I. TSB43AB23 chip
 Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket
connected to the internal IEEE 1394a header)
USB  Integrated in the South Bridge
 Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets
connected to the internal USB headers)