Radio Shack CR-320 - Manual (Page 4)

4
OPERATION
SETTING THE CLOCK
Setting the clock is simple. While hold-
ing down
TIME SET , repeatedly press (or
hold down) SLOW FORWARD or SLOW
REVERSE . The time on the display ad-
vances or reverses by 1 minute each
time you press the button. (The PM indi-
cator lights for PM hours.)
To rapidly set the time, hold down FAST
FORWARD or FAST REVERSE .
ADJUSTING THE DISPLAY
BRIGHTNESS
To change the brightness of the display,
set
DIMMER LOW/HIGH on the side of the
clock radio to LOW or HIGH .
PLAYING THE RADIO
1. Set ON/OFF/AUTO/ALARM to ON .
2. Set AM/FM to the desired band.
Notes:
• The clock radio has a built-in AM
antenna. For the best AM recep-
tion, rotate the radio.
• The clock radio’s power cord acts
as the FM antenna. For the best
FM reception, fully extend the
power cord.
3. Rotate TUNING to the desired sta-
tion.
illus of REVERSE
and FORWARD
locations
illustration of DIMMER
LOW/HIGH location
illustration of ON/OFF/AUTO/
ALARM set to ON
illustration of AM/FM
location
illustration of TUNING location
12-1621.fm Page 4 Monday, July 12, 1999 9:13 AM