Call us first, Warranty, Troubleshooting – Ryobi RY64400 User Manual
Page 18
14 - English
WARRANTY
CALL US FIRST
For any questions about operating or maintaining your product,
call the Ryobi
®
Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
TROUBLESHOOTING
PROBLEM
CAUSE
REMEDY
Engine rope cannot be pulled
Oil has entered the combustion
chamber.
This is usually caused by storing the unit
for an extended time with the engine in
an upside-down position. Remove and
clean the spark plug. Drain the oil out
of the spark plug hole, then reinstall the
spark plug.
Engine starts, runs, and accelerates
but will not idle
Idle speed screw on carburetor needs
adjustment.
Turn idle speed screw clockwise to in-
crease idle speed. See Figure 24.
EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST
Emissions Parts
Inspect Before
Clean Every
Replace Every
Replace Every
Each Use
5 Hours
25 Hours or Yearly
50 Hours or Yearly
AIR FILTER ASSY
INCLUDES:
FILTER .................................................................................................X
ENGINE LUBRICANT ..................................X ............................................................................X
SPARK SCREEN ..................................................................................................................................................................... X
CARBURETOR ASSY
INCLUDES:
HEAT DAM .................................................X
GASKETS ...................................................X
FUEL TANK ASSY
INCLUDES:
FUEL LINES ...............................................X
FUEL CAP ..................................................X
FUEL FILTER ..............................................X
IGNITION ASSY
INCLUDES:
SPARK PLUG ....................................................................................................................................................................... X
ALL EMISSIONS-RELATED PARTS ARE WARRANTED FOR THREE YEARS, OR FOR THE PERIOD OF TIME PRIOR TO THE PARTS’
FIRST SCHEDULED REPLACEMENT, WHICHEVER COMES FIRST.