Rosewill RNX-N300X - Manual (Page 7)

Wireless LAN PCI Card RNX-N300X Quick Installation Guide
6
7. Enter the Network Key (WEP Key or WPA Key) for your Wireless Network.
If your network is using WEP encryption, then a HEX or an ASCII format is necessary when entering your Network key:
■ HEX — 10 Characters in HEX notation for 40 bit or 26 characters for 128 bit encryption.
■ ASCII — 5 Characters for 40 bit or 13 characters for 128 bit encryption.
If your network is using WPA or WPA2 encryption, you must enter an 8 – 63 character alphanumeric key-phrase.
8. Select Connect.
The Wireless Network Connection dialog box appears again as you are being connected.
Once successfully connected to your wireless signal, as shown below, click the check
box to Save this network. Start this connection automatically should also be enabled.
9. Click Close.