Roberts Radio CR9955 - Manual (Page 9)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Setting alarm times
Your clock radio has two separate alarms which can be set to activate
at different times.
8
Setting alarm mode
The alarms can be set to wake you by either the buzzer or the radio.
1. Whilst holding down the Alarm 1 or Alarm 2 buttons repeatedly
press and release the Alarm mode button until the display shows
the required alarm mode e.g. Buzzer (
),Radio ( ) or Off ( ).
Release the buttons when the required alarm mode is reached. The
display will return to showing normal time.
It is possible to set Alarm 1 to wake to buzzer and Alarm 2 to wake
to radio or vice versa.
The Alarm indicator will illuminate when one or both of the alarms
are set to either Buzz or Radio mode.
The Alarm indicator will extinguish when both Alarms are set to
Off.
1. Press and hold down the Alarm 1 or Alarm 2 buttons.
2. Whilst holding down the Alarm 1 or Alarm 2 buttons press the
Up or Down buttons to set the alarm time. Release the buttons
when the correct alarm time is reached. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle
is selected.
2
2
1
2
Untitled-1 1/24/2003, 11:42 AM 9