Ricoh 3506 User Manual

Page 147

User Tools

135

Settings You Can Change with the User Tools (System Settings)

Reference
For how to access the user tools,

⇒ P.133 “Accessing the User Tools”.

System settings

Menu

Description

Panel Tone

The beeper (key tone) sounds when a key is pressed. This beep-
er can be turned on or off.

Note

❒ Default: On

Ready/Tone

Choose whether the machine beeps when it becomes ready for
a copy run after power up.

Note

❒ Default: On
❒ When the “Panel Tone” is set to Off, the beeper does not

sound even if the “Ready/Tone” is set to On.

Copy Count Display

The copy counter can be set to show the number of copies
made (Count Up), or the number of copies remaining to be
made (Count Down).

Note

❒ Default: Count Up

System Reset

You can set the reset time of the machine.

After a copy job in Interrupt or Sort/Stack/Staple mode is
completed, the mode will not be reset if there is still paper in
the sorter or originals in the document feeder. A print job can-
not be started in this condition. When the system is reset by
this user tool, the machine can start printing.

You can set this reset time from 10 to 990 seconds (in 10 sec-
onds steps) or off.

Select [On] or [Off] with the

<> keys.

When you select [On], enter the system reset time with the
number keys. Then press the [OK] key.

Note

❒ Default: On (60 seconds)