Electrical connection, Levelling, Customer care – Rangemaster R7247 User Manual

Page 15

INSTALLATION

Check the appliance is electrically safe when you have ﬁnished.

Electrical Connection

This appliance must be installed by a qualiﬁed electrician
to comply with the relevant Institute of Electrical
Engineers (I.E.E.) regulations and also the local electricity
supply company requirements.



WARNING: THIS APPLIANCE MUST BE EARTHED

Note: The appliance must be connected to the correct
electrical supply as stated on the voltage label on
the appliance, through a suitable cooker control unit
incorporating a double pole switch having a contact
separation of at least 3mm in all poles. This appliance must
not be connected to an ordinary domestic power point.

The mains terminal is situated on the back of the oven
(Fig.7-2).

Connect the cable to the correct. Check that the links are
correctly ﬁtted and that the terminal screws are tight. Secure
the mains cable using the cable clamp.

Ensure the cable route avoids the risk of trapping or touching
hot surfaces.

Current Operated Earth Leakage Breakers

Where the installation is protected by a 30mA sensitivity
residual current device (RCD), the combined use of your
appliance and other domestic appliances may occasionally
cause nuisance tripping. In these instances the kitchen circuit
may need to be reconﬁgured. This work should be carried out
by a qualiﬁed electrician.

Levelling

The worktop should already be ﬁtted and levelled, and the
cabinets mounted 90° to the worktop. It is only necessary to
ensure the top front edge of the appliance unit lines up with
the front of the worktop and is aligned with the doors.

Customer Care

Please complete your contact details in the front of this
section. Please inform the user how to operate the appliance
and hand over the instruction pack.

Thank you.

ArtNo.325-0006 - BI oven

electrical connections

��

�

��

�

Fig.7-2