Rangemaster R7247 - Manual (Page 13)

11
INSTALLATION
Check the appliance is electrically safe when you have finished.
Dear Installer
Before you start your installation, please complete the details
BELOW.
If your customer has a problem relating to your installation
they will be able to contact you easily.
You must be aware of the following safety requirements &
regulations:
This appliance shall be installed in accordance with the
regulations in force and in a well-ventilated space. Read the
instructions before installing or using this appliance.
The cooker must be installed in accordance with:
•
All relevant British Standards / Codes of Practice
• The relevant Building / IEE regulations
7. Installation
Location of the Oven
The oven may be installed in a kitchen/kitchen diner but NOT
in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
 This appliance should not be installed in a boat or
caravan.
The hob must be installed in accordance with the relevant
Building regulations and IEE regulations.
You will need the following tools and equipment to
complete the oven installation satisfactorily:
1. Electric drill
2. Steel tape measure
3. Cross head screwdriver
4. Pencil
5. Multimeter (for electrical checks)
Checking the Parts
The oven is supplied with the following parts:
•
Wire shelf x2
• Grill pan and trivet
ArtNo.050-0011 - Installer information table
����������������
�����������������������
����������������������������
�������������������
DocNo.064-0005 - Installation - R7247 oven