Runco CR-40HD - Manual (Page 19)

19
Selecting Picture Adjust
1. Press the MENU button on the remote control.
2. Press the ▲▼ button to select PICTURE ADJUST and then press the ENTER
or ► button.
3. Press the ▲▼ button to select Brightness, Contrast, Color, Tint, Sharpness,
Color Temp., Backlight, Save Settings or Restore Settings.
4. Press the MENU button to return to the previous menu.
Color Temp.
Basic Operations
Note:
Each input and scan rate has their own
picture memories. Make sure you store
your picture settings before you switch
to another input or scan rate.
Note:
Temperature 5400, 6500, 8500
are global selections and are not
adjustable. If Color Temp. requires
calibration, you must select
Custom and make adjustments
in the ISF Menu under White
Balance. (See page 25)
Runco CR-32HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Timer
Setup
ISF Calibration
Picture Adjust
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings
Backlight 100
Brightness 50
Contrast 50
Color 50
Tint 50
Sharpness 50
Picture Adjust
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings
5400
6500
8500
> Custom
Picture Adjust
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings
Save Settings
Custom
Picture Adjust
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings
Restore Settings
Custom
ISF Night
ISF Day
Picture Adjust
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings