Mounting the router, Warning, A/ab – Ryobi RT401W User Manual

Page 12: Ax/y (3)

MOUNTING THE ROUTER

WARNING:

Always unplug router and remove router bits before
mounting to router table. Remove the fence, the
insert, the featherboards and the miter guide from
the tabletop before mounting the router.

There are two methods for attaching routers to router
table. The table will accept routers with bases up to 7" in
diameter. See chart below to see whether your router will
mount directly to the table or will require the use of the
adapter plate provided.

NOTE: If your router is not one of those listed in the chart,
place the adapter base plate on top of the router base
plate and rotate until the holes in the two plates are
aligned. When hole patterns line up, the mounting scheme
has been identified.

NOTE: If your router does not fit adapter base plate or if
you wish to mount router directly to the table for greater
cutting depth, remove the base plate from your router, use
it as a template, and drill directly through the tabletop.

I. Mounting Routers with 7"

Round Adapter Base Plate

See Figure 9 and 10

1. Remove the base plate from router.

2. Place the adapter base plate (K) on the router base

according to mounting pattern identified in chart. See
Figures 9.

3. Use the screws removed from the router base plate to

attach the adapter base plate to the router base.
Tighten screws securely.

4. Routers with A and AB hole pattern use three counter-

sink 5/16" - 18 x 3/4" screws (X), to attach the adapter
base plate (K) to the router. For Ryobi routers RE600
and RE601 use three M 8 x 20 countersink screws (Y).

5. To mount Craftsman routers that use the E-hole pat-

tern

to the adapter plate (K), three 10" - 32 x 1/2" coun-

tersink screws are required (not provided).

NOTE: Adapter base plate must be mounted to the router
using countersunk flat head screws.

Fig. 9

X or Y

NOTE: Countersink
screws

Brand

Model #

Adapter

hole pattern

Ryobi

R160K, R160V

R161K, R161KT

R162K, R165

R180, R180PL

R1801M

A/AB

Porter Cable

690, 691

693LRPK

694VK, 892

893PK, 895PK

1001, 8931

9690LR

Milwaukee

26941

5615-21
5616-21
5619-20

Hitachi

KM12VC

Black & Decker

7612

DeWalt

DW 610

DW 616

Skil

1810, 1815
1820, 1823
1825, 1835

1845-02

Craftsman

17504, 17505

17506, 17511

17515, 17528
17533, 26834

27500, 27510

27511

X/Y (3)

Bdal 6144.461 3Sprachen 04.06.2005 11:56 Uhr Seite 12