Outline, Components, Replacing mcu boards – Renesas M3028BT-EPBM User Manual
Page 4: Precautions for safety, Caution, Cautions to be taken for handling this product
(2/2)
1. Outline
The M3028BT-EPBM is an MCU board for replacing the emulation probe M3028BT-EPB and the compact emulator
M30290T2-CPE for M16C/Tiny Series.
2. Components
Package components
Description Quantity
M3028BT-EPBM MCU board for replacing the M3028BT-EPB and M30290T2-CPE
1
M3028BT-EPBM User’s Manual (for replacement) (This manual)
M3028BT-EPBM User’s Manual (for replacement) (Japanese)
1
3. Replacing MCU Boards
(1) Unscrew the four screws included with the M3028BT-EPB or the
M30290T2-CPE.
(2) Pull out the M3028BT-EPBM from the PCA7501EPBA of the
M3028BT-EPB, or from the M30803T-CPEA of the
M30290T2-CPE. Note that pull them out vertically, otherwise the
connectors may be damaged.
(3) Attach the new M3028BT-EPBM to the PCA7501EPBA of the
M3028BT-EPB, or the M30803T2-CPEA of the M30290T2-CPE.
The connecting directions are as follows
- With the M3028BT-EPB
PCA7501EPBA J3 connector to M3028BT-EPBM J1 connector
PCA7501EPBA J4 connector to M3028BT-EPBM J2 connector
- With the M30290T2-CPE
M30803T2-CPEA J3 connector to M3028BT-EPBM J1 connector
M30803T2-CPEA J4 connector to M3028BT-EPBM J2 connector
(4) Tighten the four screws in an even, crisscross pattern to secure the
new M3028BT-EPBM with a screwdriver.
(5) After replacing the board, perform the self-check to make sure that
it is installed properly. For details on the self-check, refer to the
user’s manual of each product.
Figure 3.1 Replacing MCU boards
4. Precautions for Safety
CAUTION
Cautions to Be Taken for Handling This Product:
● Before you replace the MCU board, shut off the power, otherwise internal circuits may be damaged.
● Insert or pull out the MCU board vertically, otherwise the connectors may be damaged.
● For the M3028BT-EPB, after replacing the MCU board, be careful about the direction for connecting to the
PC7501.
● The MCU board with 24MHz sticker for the M30290T-EPB and the M30290T2-CPE can be replaced with this
product.
Note on This product:
● For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools
Screw x4
PCA7501EPBA or
M30803T2-CPEA
M30
290T
-EPB
M
M3028BT-EPBM
M3028BT-EPBM
(this product)
PCA7501EPBA or
M30803T2-CPEA
M30
290
T-E
PBM
M30
290
T-E
PBM