Radio Shack CD-8150 - Manual (Page 12)

12
SELECTING A CD
To select a CD, press that DISC NO.
( 1 – 5 ) button on the remote control,
then press PLAY . The selected CD
plays from Track 1.
To select the CD in the next higher-
numbered disc holder, press
DISC
SKIP . The CD changer moves to the
next higher-numbered disc holder and
begins to play that CD.
Note: You cannot use DISC SKIP or
DISC NO. during programmed play
(see “Playing a Sequence of Tracks”
on Page 16).
illustration
SELECTING A TRACK
You can select a track in two ways.
You can enter the track number using
the remote control’s
TRACK NO. but-
tons. Then press PLAY .
Notes:
• If you enter a track number higher
than the highest track number on
a CD, the CD changer starts to
play the last track on that CD.
• You cannot use TRACK NO. during
programmed play (see “Playing a
Sequence of Tracks” on Page 16).
You can also select a particular track
with the
and buttons.
While a CD is playing, press once
to return to the beginning of the cur-
rent track. Press
to skip other
tracks on the same CD.
illustration
42-5071.fm Page 12 Thursday, August 12, 1999 10:45 AM