Radio Shack CD-8150 - Manual (Page 11)

11
1. Turn on your receiver/amplifier
and select the audio input to
which you connected your CD
changer (for example, CD, AUX,
or TAPE).
2. Press PLAY to play the CD in
the play position from Track 1.
PLAY appears.
To select a different CD, see “Se-
lecting a CD” on Page 12.
To select a different track see “Se-
lecting a Track” on Page 12.
3. While a CD plays, the CD changer
displays the current disc and track
number, the elapsed time of the
current track, and a music calen-
dar that shows the total number of
tracks on the CD (up to 20) with
the current track number flashing.
When the CD changer finishes
playing a track, that track’s num-
ber disappears from the music
calendar.
Repeatedly press TIME on the re-
mote control to display in order:
• The current track’s remaining
time
• The total number of tracks on
the CD and total playing time
• The remaining number of tracks
and total time remaining on the
CD
• To return to the original display
illustration
Note: During playback, if the
changer is subjected to a sudden
shock or jolt, the rotation speed
might change, or some noise
might be produced. This is not a
malfunction.
4. To temporarily stop playing, press
PAUSE . PAUSE appears.
Press PAUSE again or PLAY
to resume play.
Or, press STOP to stop play be-
fore the last CD ends.
5. After the CD changer plays all
tracks on the current CD, it auto-
matically loads the next higher-
numbered CD and plays all of its
tracks. After it plays all tracks on
the highest-numbered CD, the CD
changer stops.
y y
y
illustration
illustration
42-5071.fm Page 11 Thursday, August 12, 1999 10:45 AM