RCA F38310 - Manual (Page 32)

BASIC TV OPERATION
2 8
PIP (Picture-in-Picture) Operation
The PIP (Picture-In-Picture) feature lets you display a second, smaller
analog (NTSC format) picture on top of the main analog picture.
Your TV is equipped with a dual NTSC tuner that tunes to cable or off-air
television signals. You will only be able to use the PIP window and main
picture with analog channels.
PIP Buttons
There are certain remote buttons that control the way the PIP window
works:
PIP Brings up the PIP window. Press PIP again to remove the window.
Arrows Let you move the PIP window to different areas of the screen.
SWAP Switches, or “swaps,” the video from the PIP window with the
main picture.
CH CTRL (Channel Control) Lets you switch channel control between
the PIP window and the main picture. To determine whether you are
controlling the PIP or the main picture, look at the channel banner as
you change channels. The triangular indicator is beside the channel
number for the picture you’re controlling.
Using the PIP Feature
While you may use PIP in different ways, this basic PIP scenario should
get you started. When watching an analog channel, follow these steps.
1. Press the PIP button on the remote control. The PIP window appears
on the screen.
2. Use the channel up and down or digit buttons to change the PIP
channel.
3. To change the program in the main picture window, press CH CTRL.
Then use the channel up and down or digit buttons.
To go back and forth between controlling the PIP window and the main
picture, press the CH CTRL button.
PIP channel
number
Main
picture
channel
number
Channel
control
indicator
Arrows
PIP
buttons
1 2 3
4 5 6
7 8 9
0
ON•OFF TV VCR1
DVD
MUTE SKIP
GO BACK FETCH
GUIDE INFO
MENU CLEAR
INPUT
REVERSE PLAY FORWARD
RECORD
PIP SWAP CH CTRL WHO
STOP PAUSE
ANTENNA
AUX DIRECTV
OK
CH +
CH
VOL
VOL
VCR2
Note that you will only
be able to use PIP with
analog channels.