RCA F38310 - Manual (Page 22)

1 8
Using the Remote
Remote Control Buttons
ON•OFF When the remote control is in TV or DIRECTV mode, ON•OFF
turns the TV on or off. If in another component mode, (VCR, DVD, etc.)
and programmed, the remote will turn the component on and off.
When pressed twice within two seconds, all components that are on will
be turned off (this feature only works with most RCA, GE, and PROSCAN
products).
VCR1 Places the remote control in VCR mode and if auto tuning is
enabled, it will turn on the TV and tune to the correct video input
channel for viewing VCR1.
TV Turns on the TV and tunes to the last-viewed TV channel. Also
places the remote control in TV mode. Placing the remote in TV mode
enables you to access the TV’s menu system as well as tune to analog,
digital, or cable TV channels.
DVD Places the remote control in DVD mode and if auto tuning is
enabled, it will turn on the TV and tune to the correct video input
channel for viewing your RCA, GE, or PROSCAN DVD player.
VCR2 Places the remote control in VCR2 mode and if auto tuning is
enabled, it will turn on the TV and tune to the correct video input
channel for viewing VCR2.
(LED) Light that indicates you’re in programming mode when
programming the remote control. Also displays when a valid remote
control button is pressed.
AUX Places the remote in auxiliary mode in order to control the
component (such as a laserdisc player) that you have programmed it to
control. Acts as a “wildcard” button, as it can be programmed to control
another VCR, cable box, satellite receiver, or an RCA, GE, or PROSCAN
audio component.
DIRECTV Places the remote control in DIRECTV mode, turns on the TV,
and tunes to the last-viewed DIRECTV ® channel. If you subscribe to
DIRECTV ® programming, you must be in DIRECTV mode to view
DIRECTV ® channels. Placing the remote in DIRECTV mode enables you to
access the TV’s menu system as well as tune to DIRECTV ® channels.
MUTE Reduces the TV’s volume to its minimum level. Press again to
restore volume.
SKIP Press once before changing channels and the TV will return to the
original channel after 30 seconds. Press repeatedly to add more time. If
no other displays are present, pressing CLEAR will cancel the commercial
skip timer.
CH +/- Scrolls up or down through the current channel list. Press once
to change the channel up or down; press and hold to continue changing
channels. If you are in TV mode and press CH+/-, you scroll through TV
channels. If you subscribe to DIRECTV
® programming and are in DIRECTV
mode, you scroll through DIRECTV ® channels. In DVD mode, CH +/- will
skip chapters on a disc played by RCA, GE, or PROSCAN DVD players.
VOL UP/DOWN Adjusts the TV’s audio volume.
FETCH Brings up the Fetch menu, which is a list of most commonly
accessed menu items.
1 2 3
4 5 6
7 8 9
0
ON•OFF TV VCR1
DVD
MUTE SKIP
GO BACK FETCH
GUIDE INFO
MENU CLEAR
INPUT
REVERSE PLAY FORWARD
RECORD
PIP SWAP CH CTRL WHO
STOP PAUSE
ANTENNA
AUX DIRECTV
OK
CH +
CH
VOL
VOL
VCR2
LED