Runco DTV-940 - Manual (Page 56)

APX-3
ON - SCREEN OPERATING INSTRUCTIONS
ACCESS TO EYE-Q TM ON-SCREEN MENUS
After the EYE-Q TM unit has been correctly installed in the projec-
tor, press the > button on the RCU (Remote Control
Unit) or the local keypad of the projector to enter the ‘Adjustment
mode’
(please refer to the projector Owner’s Manual). The EYE-Q
TM
path will be displayed in the menu:
Highlight EYE-Q TM by pushing the or keys of the
control disc (on RCU).
Press the button to enter the EYE-Q TM menu.
EYE-Q TM MENU
The EYE-Q TM menu will be displayed after the path EYE-Q TM is
selected. Six items are available:
TOUCHUP.
AUTOCONVERGENCE.
QUICKAUTOPICTURE.
FULLAUTOPICTURE.
EYE-Q TM SETUP.
EYE-Q TM DIAGNOSTICS.
Choose EYE-Q TM SETUP first to carry out the SETUP procedures.
Use EYE-Q TM DIAGNOSTICS to check whether the EYE-Q TM is
functioning normally.