beautypg.com

Location and function of controls – Runco DTV-940 User Manual

Page 11

background image

2-1

LOCATION AND FUNCTION OF CONTROLS

RS 232 Input Port
Connection between the projector and an IBM PC (or compatible)
or MAC (RS422) for remote computer control and data communi-
cation. Also used with automation devices, such as Phast, AMX,
Creston, etc.

RS 232 Output Port
RS 232 Input Port allows a communication link for PC or MAC to
the next projector in a series of projectors.

IR Sensor
Receiver for control signals transmitted from the RCU.

Communication Port -not used.

IR Remote
Connector for remote input for hard wired remote control

RGB-S or Component Input (4x BNC connector):
RGB-S input: allows a microcomputer, video camera, etc. having
analog RGB output to be connected to the projector.

Line inputs:

-signals RED-GREEN-BLUE
-COMPOSITE sync.signal

(R-Y)Y(B-Y)-S Input (component input): allows to connect e.g. a
DTV Decoder having component outputs to the projector.

Line inputs

-signals RED-LUMA, LUMA, BLUE-LUMA
-COMPOSITE sync. signal

1

2

3

4

5

6

VIDEO Input (Composite video, 1x BNC connector):
Allows a video tape recorder, video camera, color receiv-
er/monitor, etc. having video line output to be connected
to the projector.

S-VIDEO Input: Separated Y/C (luma-chroma) signal
inputs and outputs for higher quality playback of DVD
signals (4-pin S-VIDEO connector loop-through).

7

8

This manual is related to the following products: