Roberts Radio MP-16CD User Manual

Page 13

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Operating your radio - DAB

1. Fully extend the telescopic aerial located on the rear of your sound

system.

2. If your sound system is in standby mode, press the On/Off button

[Standby button on front panel] to switch on your system.

3. Press and release the DAB button [Repeatedly press the

Band/Source button on the front panel]. The display will show "Welcome
to digital radio" for a few seconds.

4. If this is the ﬁ rst time the radio is used a quick scan of UK Band III DAB

channels will be carried out. The display will show "Scanning". If the
radio has been used before the last used station will be selected.

5. During auto-tune new stations are detected and will be added to the

list.

6. When the Auto-tune is complete the ﬁ rst station (in numeric-alpha

order 0...9...A....Z) will be selected.

7. If the station list is still empty after the Auto-tune your radio will display

"No Stations available".

8. If no signals are found it may be necessary to relocate your radio or

aerial to a position giving better reception.

In some cases an external aerial may be desirable for optimal DAB
reception. This can be connected to the F-type connector on the rear
of the unit in place of the supplied telescopic antenna.