Radio Shack 15-1925 - Manual (Page 16)

Need help? Call 1-800-950-7044
16
3. Press and release SET UP , then hold down
SET UP until the red light blinks twice. This
means that your sequence is erased.
PUNCH-THROUGH
Using Punch-Through
The punch-through feature lets you alternately
control two different devices without pressing the
device selection keys for each one. Here’s how it
works.
Not all of the 6 in 1 IR/RF Remote Control’s keys
are used by every device. For example, a TV is
often the only device that uses the volume keys.
After you press
TV , then press VCR , the volume
control not used by the VCR retains its TV func-
tion.
Note: The punch-through feature does not work if
the last two devices you selected have the same
(or similar) features. For example, most TVs and
some cable converters have PWR keys on their
remote controls. In this case, you must press the
desired device key before you use the remote
control’s
PWR key.
Turning Punch-Through On and Off
If your cable converter or VCR has a volume con-
trol, you can turn off the punch-through feature to
allow the 6 in 1 to control the volume of those de-
vices. This allows your cable converter or VCR to
control the volume of your TV set (if it can already
do so). Once you turn off punch-through, you
must press the device key for the device (cable
converter or VCR) you want to use to control the
volume.
15-1925.fm Page 16 Monday, July 19, 1999 12:59 PM