Radio Shack ET-550 - Manual (Page 16)

16
When the handset or base answers,
press
SPEAKER or TALK once to end
the intercom call, then press the same
button again or press
HOLD on the
base to start the conference call.
Note: If a call comes in during an in-
tercom conversation, press
TALK on
the handset or SPEAKER on the base
once to end the intercom call, then
press
TALK or SPEAKER again to take
the call.
USING REDIAL
REDIAL lets you quickly dial the last
number dialed. When you hear a dial
tone, simply press
REDIAL ( REDIAL/P
on the base).
Notes:
• The redial memory is independent
for each keypad. You cannot
redial a number you dialed on the
handset keypad using
REDIAL/P
on the base keypad, and vice
versa.
• The redial memory holds up to
32 digits, so you can redial long-
distance as well as local num-
bers.
• The redial memory also holds
pause entries (see “Entering a
Pause” on Page 18).
• The redial memory does not store
a flash entry or any digits you
press after
FLASH (see “Using
Flash” on Page 16).
USING FLASH
FLASH performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH to answer an incoming
call without disconnecting the current
call. Press
FLASH again to return to
the first call.
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect the current call.
43-1050a.fm Page 16 Tuesday, August 17, 1999 12:56 PM