Renesas M30280T-85LGF - Manual (Page 3)

(3/4)
5. Connection Procedure (See Figure 3)
The procedure for connecting the M30280T-85LGF is outlined
below.
(1) Connect the CSSOCKET085B1007RE01 to a foot pattern
on the user system.
(2) Connect the M30290T-PTCB to the emulator.
(3) Connect the M30280T-85LGF to the
CSSOCKET085B1007RE01.
6. Height Adjustment (See Figure 4)
If there is a tall peripheral around the place where the
CSSOCKET085B1007RE01 is mounted, the height can be
adjusted about 6mm by using separately available
CSSOCKET085B1007RE01 and CSSOCKET085B1007RE02.
The procedure is outlined below.
(1) Attach the CSSOCKET085B1007RE01 on the user
system to CSSOCKET085B1007RE02 (separately
available).
(2) Attach the CSSOCKET085B1007RE02 connected as
above (1) to the CSSOCKET085B1007RE01 (separately
available).
(3) Attach the CSSOCKET085B1007RE01 connected as
above (2) to M30280T-85LGF.
85-pin 0.65mm pitch
(PTLG0085JB-A) foot pattern
A1 pin
User system
CSSOCKET085B1007RE01
(included)
These corners are not round
M30290T-PTCB
M30280T-85LGF
(1)
(2)
(3)
Emulator
M3028BT-EPB
M30290T-EPB
M3028BT2-CPE
M30290T2-CPE
Figure 3 Connection procedure of the M30280T-85LGF
Figure 4
Height adjustment of the M30280T-85LGF and user system
7. Dimensions of M30280-85LGF and Recommended Foot Pattern (See Figure 4)
Unit (mm) 0.
65
0.65
0.27
0.27 5.8
5
5.85
1.30
1.30
85-φ0.35 (Pad diameter)
4-φ0.8±0.03 (Holes for guide pin)
25.0
32
.0
7.
0
M30280T-85LGF
REV.A
MADE IN JAPAN
Recommended metal mask diameter φ0.35, 0.15 thick
Figure 5 Dimensions of M30280-85LGF and recommended foot pattern
A1 pin
User system
CSSOCKET085B1007RE02
(Separately available)
These corners are not round
M30280T-85LGF
(1)
(2)
CSSOCKET085B1007RE01
(included)
～～
～～
CSSOCKET085B1007RE01
(Separately available) (3)