ResMed escape s8 - Manual (Page 42)

38
You may have removed the Data
Card before settings were copied
to the S8 AutoSet Spirit. Reinsert the Data Card and wait
for the
Settings Success
Remove Card
message to
appear on the LCD.
The card is not a ResScan Data
Card. Only use a ResScan Data Card.
The following message
is displayed on the
LCD after you try to
copy data to a Data
Card:
Card Error
Remove Card
The Data Card is not inserted
correctly. Ensure that the Data Card is
inserted with the arrow facing up
and pointing toward the device.
The card is not a ResScan Data
Card. Use a ResScan Data Card, as
specified in this manual.
You may have removed the Data
Card before data was copied to
it. Reinsert the Data Card and wait
for the
Copy Complete
Remove Card
message to
appear on the LCD.
The following message
is displayed on the
LCD after you try to
update the settings
using the Data Card:
Settings Invalid
Remove Card
The identification details on the
Data Card do not match the
details on your device. Contact your clinician
immediately.
The following message
is displayed on the
LCD after you try to
update the settings
using the Data Card:
Settings Error
Remove Card
There is a data error on the Data
Card. Contact your clinician
immediately.
The following message
is NOT displayed on
the LCD after you try
to update the settings
using the Data Card:
Settings Success
Remove Card
The settings were not updated. Contact your clinician
immediately.
Problem Possible Cause Solution