ResMed escape s8 - Manual (Page 35)

31 C LEANING AND M AINTENANCE
E
NG
LI
SH
C
LEANING AND
M
AINTENANCE
You should regularly carry out the cleaning and maintenance described in this section.
Refer to your mask manual for detailed instructions.
D
AILY
C
LEANING
M ASK
Clean the mask according to the instructions supplied with the mask.
A IR TUBING
Disconnect the air tubing from the S8 A UTO S ET S PIRIT
(and humidifier, if used) and hang
the tubing and mask in a clean, dry place until next use.
H UMIDIFIER
If you are using a humidifier, remove it from the S8 A UTO S ET S PIRIT
and clean it
according to the instructions in the humidifier user’s manual.
W EEKLY C LEANING
1. Remove the air tubing from the S8 A UTO S ET S PIRIT
and the mask.
2. Wash the air tubing in warm water using mild detergent. Rinse thoroughly, hang
and allow to dry.
3. Before next use, assemble the mask and headgear according to the user
instructions.
4. Reconnect the air tubing to the air outlet and mask.
P ERIODIC C LEANING
1. Clean the exterior of the S8 A UTO S ET S PIRIT
with a damp cloth and mild liquid
soap.
2. Check the air filter for blockage or holes (see “Replacing the Air Filter” on
page 32).
!
WARNING
•
Beware of electric shock. Do not immerse the unit or power cord in water.
Always unplug the unit before cleaning and be sure it is dry before plugging back
in.
•
The mask system and air tubing are subject to normal wear and tear. Inspect
them regularly for damage.