Radio Shack PRO-2049 User Manual

Page 20

Note: You can change the direction of
either an automatic or manual search
by pressing

once.

Direct Search

Using direct search, you can enter a
frequency, then search for transmis-
sions above or below that frequency
within all of the frequency bands.

1. Press

MANUAL

2. Use the number keys to enter the

frequency where you want to start
the search. Press • to enter the
decimal point.

3. Press

to search up or

down from the selected frequency.

(direct) and

appear,

and the next available monitor
memory number flashes.

Note: If you entered an invalid
frequency in Step 2, the scanner
displays

Error

. Press

CLEAR

then repeat Steps 2 and 3.

4. When the scanner finds an active

frequency, you can do any of the
following:

• save the frequency into the cur-

rent monitor memory by press-
ing

MONITOR

• continue searching or change

the search direction by pressing

• stop searching and listen to

the frequency by pressing

HOLD

(hold) appears.

To manually step through fre-
quencies one at a time after you
stop a search, repeatedly press

. To continue search-

ing, either press

HOLD

or press

and hold down

for

about 1 second.

LISTENING TO MONITOR
MEMORIES

After you store frequencies into the
scanner’s monitor memories, you can
listen to them by pressing

MANUAL

MONITOR

then the number for the de-

sired monitor memory.

Note: To listen to the monitor memo-
ries, the priority channel feature must
be turned off (see “Priority” on
Page 24).

20-419.fm Page 20 Wednesday, March 24, 1999 2:43 PM