Renesas M30260T-48FPD - Manual (Page 4)

(2/4)
1. Outline
The M30260T-48FPD is a converter board for connecting the
emulation probe M30290T-EPB for M16C/26A, 28, 29 Groups
and the compact emulator M30290T2-CPE to a foot pattern for
M16C/26A Group 48-pin 0.5-mm-pitch LQFP (48P6Q-A).
2. Package Components (See Figure 1)
(1) M30260T-48FPD (Base board M30290T-PTCB and
150mm FFC cable included) 1 pc.
(2) YQPACK048SD (made by Tokyo Eletech Corporation) 1 pc.
(3) NQPACK048SD (made by Tokyo Eletech Corporation) 1 pc.
(4) YQ-GUIDE (made by Tokyo Eletech Corporation) 4 pcs.
(5) M30260T-48FPD User's Manual (This manual) 1 pc.
3. Specifications
Table 1 Specifications
Applicable package
48P6Q-A
(48-pin 0.5-mm-pitch LQFP)
Between M30260T-48FPD and
YQPACK048SD:
100 times guaranteed Insertion/removal
iterations of
connector
Between M30290T-EPB or
M30290T2-CPE and
M30260T-48FPD:
50 times guaranteed
4. Usage (See Figure 2)
The M30260T-48FPD can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK048SD on the user system.
(1) For debugging
Mount the NQPACK048SD and YQPACK048SD on the
foot pattern of the user system in that order. And fix them
with the YQ-GUIDE’s (do not use the screws included
with the YQPACK048SD).
After connecting the M30290T-EPB or M30290T2-CPE
and M30260T-48FPD, connect the M30260T-48FPD to
the YQPACK048SD.
(2) For onboard evaluation
Mount an M16C/26A Group MCU and HQPACK048SD
(separately available) in that order on the NQPACK048SD
on the user system. And fix them using a screw included
with the HQPACK048SD.
Before using the M30260T-48FPD, be sure to read "7.
Precautions" on page 4 and the M30290T-EPB or
M30290T2-CPE User’s Manual.
Figure 1 Package components of the M30260T-48FPD
Figure 2 Usage of the M30260T-48FPD
: No. 1 pin
*: These products are included with the M30260T-48FPD package.
48-pin 0.5-mm-pitch
(48P6Q-A) foot pattern
YQ-GUIDE (x4) *
YQPACK048SD *
NQPACK048SD *
HQPACK048SD
(separately available)
M30290T-PTCB
M30260T-48FPD
(1) Debugging
(2) On-board evaluation
M30290T-EPB
or
M30290T2-CPE
MCU with on-chip
flash memory etc.
YQ-GUIDE (x4) YQPACK048SD NQPACK048SD
M30260T-48FPD