RIDGID TS2400 - Manual (Page 4)

4
SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention
measures.
SYMBOL MEANING
DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious
injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or seri-
ous injury.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moder-
ate injury. It may also be used to alert against unsafe practices that may cause property damage.
Advises you of additional information concerning the operation or maintenance of the equipment. Note:
SAVE THESE INSTRUCTIONS
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this prod-
uct. Read the operator's manual for complete safety, assembly, operating and maintenance, and repair information.
• Do not expose to rain or use in damp locations.
• Failure to keep your hands away from the blade will result
in serious personal injury.
• Failure to keep your hands away from the blade will result
in serious personal injury.
• To reduce the risk of injury, the user must read and understand
the operator’s manual before using this product.
• Always wear safety goggles or safety glasses with side
shields and a full face shield when operating this product.
SYMBOL NAME
Wet Condition Alert
No Hands Symbol (Miter Saw)
Read the Operator’s Manual
Eye Protection
MEANING
No Hands Symbol (Table Saw)