Renesas M37630T-RFS - Manual (Page 8)

( 6 / 8 )
2. Things to Check When Unpacking
The M37630T-RFS consists of the following parts and the board. When unpacking, check to see if
your M37630T-RFS package contains all of these items.
Contents
M37630T-RFS x1
PCA4628 x1
PCA4628B x1
TQSOCKET044SAG x1
TQPACK044SA x1
M37630E4FS x1
M37630T-RFS User's Manual (this manual) x1
When shipped from the factory:
• The PCA4628B is already connected to the M37630T-RFS.
• The TQSOCKET044SAF is already connected to the PCA4628B.
3. Introduction
The M37630T-RFS is an emulator MCU board which is used by connecting it to the M38000T-FPD,
M38000TL-FPD or M38000TL2-FPD emulation pod for 8-bit microcomputers. The M37630T-RFS
functions as an emulator MCU by connecting the M37630E4FS to the M37630T-RFS board.
The 44-pin QFP MCU (M37630E4FP) can also be mounted by connecting the attached PCA4628
instead of the M37630T-RFS.
Figure 3.1 shows the system configuration using the M37630T-RFS.
Figure 3.1 Configuration