RIDGID R7100 - Manual (Page 12)

12
OPERATION
WARNING:
Always wear safety goggles or safety glasses with
side shields when operating this tool. Failure to do
so could result in dust, shavings, or loose particles
being thrown into your eyes, resulting in possible
serious injury.
Two-Speed Settings
See Figure 7.
The drill features a High or Low speed selector. Select the
desired speed by turning the selector to either 1 (Low) or 2
(High).
The following guidelines may be used in determining correct
speed for various applications.
■ Low speed may be used for driving screws or drilling.
■ High speed may be used for drilling.
Fig. 7