Radio Shack Light and Learn Remote - Manual (Page 15)

15 Operation
5. Place the device’s remote control head-to-head
(about 2 inches apart) with the 6-In-One Remote.
6. On the device’s remote control, hold down the key
to be learned until the red light on the 6-In-One
Remote blinks twice.
If the red light does not blink twice, repeat Steps
1– 5.
To learn functions on another key, repeat Steps 3–6.
To lock in learned functions on the 6-in-One Remote,
hold down
P until the red light blinks twice.
To test a learned function, press the learned key on
the 6-In-One Remote and use the function as usual.
Deleting a Learned Function
1. Hold down P until the red light blinks twice.
2. Press 9 7 6 . The red light blinks twice.
3. Press the device key that corresponds with the
desired device’s remote ( TV , VCR , CBL/SAT , DVD ,
or AUX ).
4. Press the Smart key ( 1S , 2S , 3S , or 4S ) for the
learned function you want to delete twice. The
LED blinks twice.
5. To clear functions stored on other Smart keys,
repeat Steps 1–4.
X
Operation
Note: The command keys on the 6-In-One Remote
work the same as the keys on your original remote
controls. However, the labeling may be different.