Ricoh SP3510SF - Manual (Page 70)

• To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
• Pour réduire le risque d'incendie, utiliser uniquement des conducteurs de télécommunications 26
AWG ou de section supérieure.
• : By law in the United States, you must program your phone number identification (your
fax number) into your machine before you can connect to the public phone system.
• Make sure the connector is the correct type before you start.
1. Connect a telephone line cord to LINE.
CMF032
2. If using an external telephone, connect the telephone to TEL.
CMF033
• After connecting the machine to the telephone line, configure the telephone network settings
and fax reception mode.
2. Getting Started
68