RCA 28310 - Manual (Page 12)

1
Installing the Phone
Installing the Handset Battery
NOTE: You must install the handset batteries
before using the cordless handset.
CAUTION: To reduce the risk of fire or
personal injury, use only the Thomson Inc.
approved model BYD NiMH H-AAA 900mAh
1.2V, rechargeable Nickel-metal Hydride AAA
batteries, which are compatible with this unit.
1. Locate batteries and battery door which are packaged together
inside a plastic bag and are separate
from the handset.
. Locate the battery compartment on
the back of the handset.
. Insert the batteries.
. Close the battery compartment by
pushing the door up until it snaps
into place.
5. Plug the AC power adaptor of the
charge cradle to an electrical outlet.
. Place the handset in the charge
cradle. The CHARGE indicator turns
on, verifying the battery is charging.
Allow handset to charge for 16 hours prior to first use. If you
do not properly charge the handset, battery performance is
compromised.