beautypg.com

Taking a measurement – ReliOn Automatic Blood Pressure Monitor with Two Cuffs 7300REL User Manual

Page 31

background image

3. Press the USER ID Selection Switch (

)

to select your ID (A or B).

A and B are alternately displayed.
You do not need to press this button if no
change is needed.

NOTE: Always use the same User ID

when taking a measurement. The monitor stores the
measurement values in the memory by the User ID selected.

4. Press the START/STOP button again.

The cuff starts to inflate automatically. As the cuff inflates, the monitor
automatically determines your ideal inflation level.
This monitor detects your blood pressure and pulse rate during
inflation. The Heartbeat Symbol (

) flashes at every heartbeat. Do

not move your arm and remain still until the entire measurement
process is completed.

NOTE: To stop the inflation or measurement, press the START/STOP

button. The monitor will stop inflating, start deflating and will
turn off.

TAKING A MEASUREMENT

31

HEM-7300-WM_A_M_A-E_SP.qxp 8/19/11 5:29 PM Page 31