ReliOn Automatic Blood Pressure Monitor with Two Cuffs 7300REL - Manual (Page 15)

15
TO DISCONNECT THE AC ADAPTER
① Hold and pull the Housing to remove the AC Adapter from the
electrical outlet. Do not remove by pulling the cord.
② Remove the AC Adapter plug from the monitor.
WARNING
Do not plug or unplug the power cord into the electrical outlet with
wet hands.
WARNING
Do not overload power outlets. Plug the device into the appropriate
voltage outlet.
TO CONNECT THE AC ADAPTER
① Insert the AC Adapter Plug into the
AC Adapter Jack on the right side
of the monitor as illustrated.
② Plug the AC Adapter into a 120V
AC outlet (60 cycles).
Housing
Cord
USING THE AC ADAPTER
HEM-7300-WM_A_M_A-E_SP.qxp 8/19/11 5:29 PM Page 15