Renesas SH7058 - Manual (Page 10)

4
2. After checking the location of pin 1 on the IC socket connector and pin 1 on the IC socket,
align the guide pins on the IC socket connector with the guide holes on the IC socket, and
insert the IC socket connector into the IC socket (figure 2).
CAUTION
Check the location of pin 1 before inserting.
Figure 2 Installing IC Socket to User System
2.1.2 Installing IC Socket Connector
CAUTION
Check the location of pin 1 before inserting.
After checking the location of pin 1 on the user system interface board and pin 1 on the IC socket
connector, align the guide pins on the IC socket connector with the guide holes on the user system
interface board, and insert the IC socket connector into the IC socket (figure 3).