ROTEL RA-1070 - Manual (Page 11)

11
Specifications
Continuous Power Output 100 watts/ch
(20-20 kHz, < 0.03%, 8 ohms)
Total Harmonic Distortion (20Hz-20kHz ) < 0.03% at rated power,
1/2 power or 1 watt
Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.05% at rated power,
1/2 power or 1 watt
Frequency Response
Line level inputs 4Hz – 100kHz, ± 3dB
Phono input 20Hz – 20kHz. ± 0.5dB
Damping Factor (20-20,000 Hz, 8 ohms) 400
Input Sensitivity / Impedance
Line level inputs 150 mV / 33 kOhms
Phono input (MM) 1.2mV / 68 kOhms
Input Overload
Line level inputs 5 V
Phono input (MM) 70 mV
Preamplifier Output Rated Voltage 1V
Signal to Noise Ratio (IHF “A” weighted)
Line level inputs 102 dB
Phono input 70 dB
Power Requirements
USA Version 115 Volts, 60 Hz
European Version 230 Volts, 50 Hz
Power Consumption 400 Watts
Dimensions (W x H x D) 430 x 121 x 360 mm
16
15 / 16 x 4 3 / 4 x 14 3 / 16
Weight (net) 10.3 kg, 22.7 lbs.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
English