RoyalTek RN2 - Manual (Page 17)

17
RN2 Users Manual
Chapter 3 Using the RN2
3.1 RN2 Operating Basics
After fully charging the RN2 it is ready to be used. You can now turn it on and proceed to system
settings configuration.
3.2 To turn on the device:
1. Sliding the battery switch to “ON”. (Default status OFF)
2. Turn on your device by pressing the power button on the top right panel of the device.
After turn on the device, main page will display. This is also referred to the Favorite page.
3.3 To configure system settings:
If you intend to start using your RN2 at once, we recommend that you configure the language and time
zone settings first. The rest of the user preferences can be set up later.