Renesas Converter Board for M32171FxxFP M32171T-PTC - Manual (Page 4)

(2/4)
1. Outline
The M32171T-PTC is a converter board to feature debugging
functions such as real-time tracing when using the
M32171FxxFP with the emulator M32170T-SDI,
M32100T-SDI-E or M32100T2-SDI-E.
2. Package Components
(1) M32171T-PTC converter board
(2) YQPACK144SD (made by Tokyo Eletech Corporation)
(3) NQPACK144SD (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE (x4)
(5) Phillips screwdriver (made by Tokyo Eletech Corporation)
(6) M32171T-PTC User’s Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
144P6Q-A
(144-pin 0.5-mm-pitch QFP)
Applicable MCU M32171FxxFP
Applicable emulators
M32170T-SDI-E
M32100T-SDI-E
M32100T2-SDI-E
Mounted MCU M32170F6VWG
Mounted clock 10 MHz
Power supply Supplied from target board
4. Usage
The M32171T-PTC can be used for debugging and onboard
evaluation in common by mounting the NQPACK144SD on
the target board.
(1) For debugging
Mount the NQPACK144SD (included with the
M32171T-PTC) on the 144QFP foot pattern of the target
board. And connect the M32171T-PTC via the
YQPACK144SD to the NQPACK144SD. As the
M32170F6VWG is mounted on the M32171T-PTC, you
can fully use the emulator's functions such as real-time
tracing.
(2) For onboard evaluation
Mount the M32171FxxFP and HQPACK144SD (not
included) on the NQPACK144SD of the target system in
this order.
Before using the M32171T-PTC, be sure to read “7.
Precautions” on page 4.
Screw driver
M32171T-PTC
YQPACK144SD
NQPACK144SD
YQ-GUIDE's (x4)
Figure 1 Package components
(1) For debugging
M32171T-PTC
YQPACK144SD
NQPACK144SD
YQ-GUIDE's (x4)
(2) For on-board
evaluation
Interface cables of the probe
HQPACK144SD
(Not included)
144-pin 0.5-mm-pitch
(144P6Q-A) foot pattern
M32171FxxFP
: No. 1 pin position
Be sure to align the pins.
Figure 2 Usage of the M32171T-PTC