RCA DRD203 RW - Manual (Page 6)

4
Using This Manual
Using this Manual
The purpose of this User’s Manual is to give you the information you’ll
need to begin using the DSS system. The manual is divided into two
parts:
Section 1: Using Your DSS System contains the information and the
steps necessary to learn how one simple rule—Point and Select—allows
you to use every feature in the Program Guide and the menu system.
(See The Only Rule: Point and Select on page 5.)
Section 2: Setting Up Your DSS System contains chapters of
information that may be necessary if you move, change, or add
components in your DSS system. This section includes the steps
necessary to:
• Set up your DSS remote control
• Connect the DSS receiver to your TV and other components
• Order DSS accessories
Important Note about This User’s Manual
This manual assumes that your DSS system has been installed, meaning:
1. The DSS satellite dish has been installed, correctly pointed at the
satellite, and connected to your DSS receiver.
2. The DSS receiver is connected to your television and telephone
line.
3. The access card is installed in your DSS receiver.
Note: Your access card has been matched to your receiver, and should already be
installed when you take the receiver out of the packing box. The access card should
only be taken out of the DSS receiver when you are issued a new card by your
programming providers.
4. The DSS TV Universal Remote Control has batteries and has
been programmed to control both your DSS receiver and your
TV (if your TV is remote-controllable).
If your system has not been installed, refer to the satellite dish Installer's
Guide for information regarding proper installation. Then, refer to the
section, Connecting Your DSS Receiver, in this manual. See your dealer
for specific information regarding professional installation or the
purchase of a Self-Installer’s Kit.