Roberts Radio ColourStream - Manual (Page 67)

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri) 66
FM Radio
Manual tuning - FM
FM
AUTO TUNE
Signal
15:05 26 Jun 2010
Auto Tune
98 103 106 108 94 90 88
87.50MHz
STEREO
Auto tuning - FM
FM
AUTO TUNE
Signal
15:05 26 Jun 2010
98 103 106 108 94 90 88
87.50MHz
Auto Tune
STEREO AUTO TUNE Auto Tune
Touch the Auto Tune button until Auto Tune appears
in yellow.
Touch the Left or Right buttons to cause the radio to scan
to fi nd a station. It will stop scanning when it fi nds a radio station
of suffi cient strength. When the end of the waveband is reached
the radio will recommence tuning from the opposite end of the
waveband.
The display will show the frequency of the signal which has been found.
If RDS information is available, after a few seconds the display will show
the radio station name. Stereo or Mono broadcasts are indicated at the
top of the screen.
If you only hear hiss or interference, simply touch the Left or Right buttons
to scan further. Your radio may have found a spurious interference signal.
The yellow markers at the top of the display show the relative strength of
the FM signal being received.
AUTO TUNE Auto Tune
Ensure Autotune is deselected. (Auto Tune will be
displayed in white).
Touch to control the frequency that the radio will tune to. The
frequency will change in steps of 50kHz.
When the end of the waveband is reached the radio will
recommence tuning from the opposite end of the waveband.
Alternatively move the dial scale pointer on the screen to manually select
the frequency.