beautypg.com

Operation, Turning on the amplifier, Setting the level control – Radio Shack Trunk Mount User Manual

Page 18

background image

18

OPERATION

TURNING ON THE AMPLIFIER

The amplifier automatically turns on whenever you turn on your autosound sys-
tem. POWER lights when the amplifier is operating.

SETTING THE LEVEL CONTROL

For the best performance, you can adjust the level of the audio signals that enter
the amplifier by following these steps.

Cautions:

• The sound distorts if any output channel shorts. Turn off the amplifier and

try to locate the short.

• To prevent draining the vehicle’s battery, do not play the amplifier for too

long using the ignition switch’s ACC position after turning off the vehicle’s
ignition.

1. Using a flat blade screwdriver, turn both

LEVEL MIN/MAX

controls fully coun-

terclockwise to

MIN

.

Note: The right level control is for the front speakers; the left level control is
for the rear speakers.

12-1976.fm Page 18 Tuesday, July 13, 1999 10:01 AM