Roland Classic Keyboard C-230 - Manual (Page 36)

36
Additional Convenient Functionality
You can connect external speakers or a mixing console to the OUTPUT jacks for performance on stage, or connect a recorder to
record your playing.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power
on all devices before making any connections.
■ To turn the power on
1.
Set the volume of the C-230 and the connected audio
device to the minimum level.
2. Switch on the C-230’s power.
3. Switch on the connected device.
4.
Adjust the volume of the C-230 and the external audio
device.
■ To record a performance from the
C-230 onto an audio recorder
1. Start recording on the connected device.
2. Perform on the C-230.
3.
When you've finished performing, stop recording on
the connected device.
■ To turn the power off
1.
Minimize the volume of the C-230 and of the connected
device.
2. Switch off the connected device.
3. Switch off the C-230.
Playing through external speakers/Recording your
performance using an audio device
Audio
Recorder
(Only one of these can be connected:
either a recorder or powered monitors.)
Powered Monitors
C-230_e.book Page 36 Tuesday, May 19, 2009 10:22 AM