Roland Classic Keyboard C-230 - Manual (Page 14)

14
Getting Ready to Play
Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down,
you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction.
■ Turning the power on
1. Press the [Power] switch.
* This unit is equipped with a protection circuit. A brief interval (a few
seconds) after power up is required before the unit will operate normally.
2. Select an organ, harpsichord, fortepiano or “Others” sounds.
■ Turning the power off
1.
Press the [Power] switch.
Turning the power on/off
Press Press again
ON OFF
C-230_e.book Page 14 Tuesday, May 19, 2009 10:22 AM